Архив форума "Клуб любителей DVD" с 2000 по 2014гг

Много и ничего(+)

Автор: FOXTREE
<foxtree@mail.ru>
Дата: 12.09.00, @18:21

`а насколько сильно отличаются дрова 1.81,1.82 от 1.8, 1.7
`
README.TXT For REALmagic Hollywood Plus(TM)
Release 1.8.2 (Build 125) for Win 95/98 ----- June 8th, 2000
============================================================

____________________

WHAT'S NEW IN THIS RELEASE 1.8.2
================================
- If you need to start DVD Station in full-screen mode, you can do
it now by adding the line "fullscreen=1" in the [Settings] section
of WVP.INI in the directory where you installed the applications
(usually REALmagic).
For audio CDs and drives with MPEG contents (defined as data by
DVD Station panel, you can start DVD Station in Repeat mode by
adding the line "repeatmode=1" in this same section [Settings].
- A fix for the movie "The Sixth Sense" for R2/R4.
- Some movies encoding require to disable the UDF format. for proper
playback. Please see note 15 in section VI below for details.
- This release of the drivers will behave like rel 1.7 as far as
the support to special sound cards.

CLARIFICATION NOTE ABOUT REGION CODES :
-------------------------------------
The program "DVD Drive Region" in the REALmagic Group is for setting
the region code of the RPC2 drives. The region code on the hardware
of Hollywood Plus is irrelevant in this case.

If you don't have an RPC2 drive, then the control will be by the region
code on the Hollywood Plus. This can be set by running SETUP from
the second diskette (application) and select the second option in the
menu : "1 - Install Application, 2 - Set the region code".

WHAT'S NEW IN THIS RELEASE 1.8.1
================================
- A fix for a bug while accessing the MPEG data on some movies that
leads to the error message MMSYSTEM275. This bug was introduced
in release 1.8.
- Some region 4 movies published by a certain company are exhibiting
audio noise during playback. This is due to some CRC errors in the
AC-3 stream and can be fixed by ignoring these errors using the
registry entry
IgnoreAc3Crc=1 in the folder
HKEY_LOCAL_MACHINE\Software\Sigma Designs\REALmagic\13
It is recommended to have it equal to the default value zero to
allow the driver to handle these errors by not decoding these
blocks (or passing them to the external AC-3 decoder, if
available).

WHAT'S NEW IN THIS RELEASE 1.8
==============================
- DTS is now supported : whenever you choose the DTS option in a
movie menu the OUTPUT WILL BE DIRECTED THRU THE SP/DIF OUPUT IN
DIGITAL FORMAT REGARDLESS OF THE DVD STATION AUDIO OUPUT SETTING,
so the DTS stream is NOT decoded thru the analog mini audio jack
- NTSC to PAL conversion does not suffer of the 1 sec stuttering
- The audio volume sliding bar shows in full screen
- PC Friendly will show the playback of movie with the black
key color (video was not shown with rel 1.7 - audio only heard)
- A timimg fix for the Jaton's OEM board on Pentium III systems
- The audio special output (6 channel Wave) support to sound cards
is removed for copyright issues

WHAT'S NEW IN THIS RELEASE 1.7
==============================
- Implemented basic support for RPC2 drives (DVD-ROM drives that
carry the region code)
- Added auto-calibration "on the fly" when no calibration has been
done before at the current resolution/color depth.
- The audio special output (6 Channel Wave) supports the ForteMedia
sound card.

WHAT'S NEW IN THIS RELEASE 1.6.2
=================================
- A fix for the playback with AC-3 audio output for some movies
(in the previous release it needed to start in Stereo output mode)
- An improvement in the auto-calibration
- The Help file shows a description for the buttons which did not
have one in the previous release.
- Support for Chinese help under Chinese Windows
- There is a special audio output now for the Formosa (nFIC) sound
card based on the ESS Canyon3D sound chip. This audio output
setting will route internally the audio output to the sound card,
downmixing to 6 channels WAVE API. NO output comes from the stereo
audio jack of Hollywood Plus. This setting is ONLY good for this
sound card. If you don't have this sound card, please do not use
this setting.

WHAT'S NEW IN RELEASE 1.6
==========================
- The TV output option has two new settings :
- MultiSystem : the output will follow the source of the movie,
i.e. if an NTSC movie the output will be NTSC
and the same for PAL
- PAL 60 : the output will be at a frequency of 60 Hz, the same
as NTSC but with PAL colors (needs TV set with this
capability)
- A fix for the playback on some systems that were crashing when
outputting to TV
- A fix for the permanent display of some movies' subtitles
- A better handling of the AC-3 output to suppress noise appearing on
some Dolby Digital decoders (when AC-3 output is enabled)
- A fix for the disappearance of the second subtitle line or the
highlighting of a wrong area for the menus buttons on TV (when
loopback cable is not present)
- A fix for movies encoded the same way like "Die Hard III" region 4
which was not played back properly
- A larger tolerance range for the PAL TV sets
- Addition of a button in DVD Station to set your preferred default
DVD-ROM drive
- Addition of the option "/f=filename" on the command line of
DVD Station to allow the direct play back of the file
- Compatibility with the IBM MPEG 2 title "Worldbook 1999"

Сообщения в ветке

Re: H+_and_SBLIVE_ -- FOXTREE -- 12.09.00@17:50 (Чит.: 60)

Re: H+_and_SBLIVE_ -- val -- 12.09.00@17:56 (Чит.: 51)

Много и ничего(+) -- FOXTREE -- 12.09.00@18:21 (Чит.: 60)

' `а насколько сильно отличаются дрова 1.81,1.82 от 1.8, 1.7
' `
' README.TXT For REALmagic Hollywood Plus(TM) 
' Release 1.8.2 (Build 125) for Win 95/98 ----- June 8th, 2000
' ============================================================
' 
' 		     ____________________
' 
' WHAT'S NEW IN THIS RELEASE 1.8.2
' ================================
' -  If you need to start DVD Station in full-screen mode, you can do
'    it now by adding the line "fullscreen=1" in the [Settings] section
'    of WVP.INI in the directory where you installed the applications
'    (usually REALmagic).  
'    For audio CDs and drives with MPEG contents (defined as data by
'    DVD Station panel, you can start DVD Station in Repeat mode by
'    adding the line "repeatmode=1" in this same section [Settings].
' -  A fix for the movie "The Sixth Sense" for R2/R4.
' -  Some movies encoding require to disable the UDF format. for proper
'    playback. Please see note 15 in section VI below for details.
' -  This release of the drivers will behave like rel 1.7 as far as
'    the support to special sound cards.
' 
' 
' CLARIFICATION NOTE ABOUT REGION CODES :
' -------------------------------------
' The program "DVD Drive Region" in the REALmagic Group is for setting
' the region code of the RPC2 drives.  The region code on the hardware
' of Hollywood Plus is irrelevant in this case.
' 
' If you don't have an RPC2 drive, then the control will be by the region
' code on the Hollywood Plus.  This can be set by running SETUP from
' the second diskette (application) and select the second option in the
' menu : "1 - Install Application, 2 - Set the region code".  
' 
' 
' 
' 
' 
' WHAT'S NEW IN THIS RELEASE 1.8.1
' ================================
' -  A fix for a bug while accessing the MPEG data on some movies that
'    leads to the error message MMSYSTEM275. This bug was introduced
'    in release 1.8.
' -  Some region 4 movies published by a certain company are exhibiting
'    audio noise during playback. This is due to some CRC errors in the
'    AC-3 stream and can be fixed by ignoring these errors using the 
'    registry entry 
'       IgnoreAc3Crc=1   in the folder 
'    HKEY_LOCAL_MACHINE\Software\Sigma Designs\REALmagic\13
'    It is recommended to have it equal to the default value zero to
'    allow the driver to handle these errors by not decoding these 
'    blocks (or passing them to the external AC-3 decoder, if 
'    available).
' 
' 
' WHAT'S NEW IN THIS RELEASE 1.8
' ==============================
' -  DTS is now supported : whenever you choose the DTS option in a
'    movie menu the OUTPUT WILL BE DIRECTED THRU THE SP/DIF OUPUT IN
'    DIGITAL FORMAT REGARDLESS OF THE DVD STATION AUDIO OUPUT SETTING,
'    so the DTS stream is NOT decoded thru the analog mini audio jack
' -  NTSC to PAL conversion does not suffer of the 1 sec stuttering
' -  The audio volume sliding bar shows in full screen
' -  PC Friendly will show the playback of movie with the black
'    key color (video was not shown with rel 1.7 - audio only heard)
' -  A timimg fix for the Jaton's OEM board on Pentium III systems
' -  The audio special output (6 channel Wave) support to sound cards
'    is removed for copyright issues
' 
' WHAT'S NEW IN THIS RELEASE 1.7
' ==============================
' -  Implemented basic support for RPC2 drives (DVD-ROM drives that 
'    carry the region code)
' -  Added auto-calibration "on the fly" when no calibration has been
'    done before at the current resolution/color depth.
' -  The audio special output (6 Channel Wave) supports the ForteMedia
'    sound card.
' 
' WHAT'S NEW IN THIS RELEASE 1.6.2
' =================================
' -  A fix for the playback with AC-3 audio output for some movies
'    (in the previous release it needed to start in Stereo output mode)
' -  An improvement in the auto-calibration
' -  The Help file shows a description for the buttons which did not
'    have one in the previous release.
' -  Support for Chinese help under Chinese Windows
' -  There is a special audio output now for the Formosa (nFIC) sound
'    card based on the ESS Canyon3D sound chip.  This audio output 
'    setting will route internally the audio output to the sound card,
'    downmixing to 6 channels WAVE API. NO output comes from the stereo
'    audio jack of Hollywood Plus.  This setting is ONLY good for this
'    sound card. If you don't have this sound card, please do not use 
'    this setting. 
' 
' WHAT'S NEW IN RELEASE 1.6
' ==========================
' -  The TV output option has two new settings :
'      -  MultiSystem :   the output will follow the source of the movie,
'                         i.e. if an NTSC movie the output will be NTSC 
'                         and the same for PAL
'      -  PAL 60 : the output will be at a frequency of 60 Hz, the same
'                  as NTSC but with PAL colors (needs TV set with this
'                  capability)
' -  A fix for the playback on some systems that were crashing when
'    outputting to TV
' -  A fix for the permanent display of some movies' subtitles
' -  A better handling of the AC-3 output to suppress noise appearing on
'    some Dolby Digital decoders (when AC-3 output is enabled)
' -  A fix for the disappearance of the second subtitle line or the 
'    highlighting of a wrong area for the menus buttons on TV (when
'    loopback cable is not present)
' -  A fix for movies encoded the same way like "Die Hard III" region 4
'    which was not played back properly
' -  A larger tolerance range for the PAL TV sets
' -  Addition of a button in DVD Station to set your preferred default
'    DVD-ROM drive
' -  Addition of the option "/f=filename" on the command line of
'    DVD Station to allow the direct play back of the file
' -  Compatibility with the IBM MPEG 2 title  "Worldbook 1999"
' 
' 
'

Посылать уведомление об ответе:

[Индекс] [Посмотреть ветку] [Настройки] [DVDSpecial.ru]