[Индекс] | [Посмотреть ветку] | [Настройки] | [DVDSpecial.ru] |
Znachit tak
Автор:
< >
Дата: 08.06.03, @13:21
1. http://books.jvcservice.com/ Nabrat' - 30000 Nazat' - Model Search Nazat' - HM-DH30000U Nazat' - Instruction Manual. 1.86 MB (1,959,516 bytes). PDF File. Chitat' - str 70-73 of 84 2. Peresilat' player mne lubym variantom v lubye sroki (hot' cerez pol-goda). Ya idu v BestBuy Pokupayu player i garantiu na tri goda Cerez 2-3 nedeli prihozu obratno i sdau slomannyi player - poluchay den'gi obratno. Novyi player uze davno k tomu vremeni budet opyat' u tebya. Edinstvennye rashody - peresylka. Vozmozno budut kur'ery. Iz manuala: SYMPTOM 1. The power will not come on. 2. The clock works, but the VCR’s power will not come on. POSSIBLE CAUSE The AC power cord is disconnected. The VCR is in the timer recording standby mode with “AUTO TIMER” set to “OFF” (look pg. 56). The child lock function is activated. CORRECTIVE ACTION Connect the AC power cord. Press TIMER to disengage. Press and hold POWER on the Remote for more than seven seconds to release the child lock function (look pg. 78). From pg 56 AUTO TIMER ON OFF When this function is set to “ON”: The timer recording standby mode is automatically engaged when the VCR is turned off. It is temporarily canceled when the VCR is turned on. You do not have to press TIMER to engage or disengage the timer recording standby mode. When this function is set to “OFF”: You have to press TIMER to engage or disengage the timer recording standby mode. From pg 78 Child Lock You can disable the VCR operations. You can only use the Remote for this operation. While the VCR is turned on, press and hold POWER on the Remote for more than 10 seconds. The VCR turns off, and the child lock indicator (CL) appears on the front display panel. To release the child lock, press and hold POWER on the Remote until the VCR turns on. During timer recording, pressing TIMER also releases the child lock. NOTES: When the child lock function is in use, keep the Remote out of the children’s reach. Timer recording programs will be performed even if the child lock function is activated. ATTENTION This VCR contains microcomputers. External electronic noise or interference can cause microcomputer to malfunction. If the VCR does not operate correctly switch its power off and unplug the AC power cord from the AC supply. Wait for a while and then plug the power back in. Eject and check the condition of the cassette. If everything appears normal, you can operate the VCR as usual. |
Сообщения в ветке